• The product is made of Kevlar, which heats up faster, heats more evenly, and can also be effectively waterproof and moisture-proof
• The product has independent switch control, and the switch has a built-in intelligent temperature control chip, three levels of temperature adjustment, click the switch key to switch gears, intelligent temperature control is more convenient
• The product heats up quickly, heats up quickly in 10 seconds, and has a large heating area
• The product heating sheet adopts the method of magic tape fixation, which can be directly pasted and fixed on the handlebar, which is convenient and quick to install
• IP67 waterproof level, even if the switch and handle sleeve is soaked in water, it can work normally, when the handle sleeve needs to be cleaned, only unplug the plug, and you can wash it, which is very convenient
• Using silicone printing process, better slip resistance, printed with fashion patterns, visually cooler after installation

Wiring method:

• The red wire of the product is connected to the positive pole of the power supply, and the black wire of the product is connected to the negative pole of the power supply (the reverse light does not light up, the switch cannot be used, only heat)

LED indicator status:

• Indicator light always on (high-grade: red light always, mid-range: blue light always on, low range, green light always on)

Specification: 

• Model: CS-974B1
• Product net weight: 135g
• Input voltage: DC12V
• Product line length: 105CM (heating sheet to switch), 142CM (switch to electric door lock)
• Working temperature: -30°C to +100°C
• Product power: high-gear 25W, mid-gear 20W, low-gear 15W
• Product material: composite fiber heating wire + Kevlar wear-resistant cloth, (L bracket) stainless steel

Note:

• Please choose the appropriate gear according to the ambient temperature, under low temperature conditions, due to hand stiffness can not accurately sense the temperature of the electric heating handle cover in time, please use low or medium first to prevent high temperature scalds.
• This product is only suitable for motorcycles with 12V batteries, please read the installation diagram carefully before installation, incorrect wiring will cause damage to the parts.
• This product can only be installed on the motorcycle handlebar for power-on use, before installation, you can use the battery to test whether the product is correctly energized.
• It is strictly forbidden to work with electricity (empty burning) when not riding to prevent the temperature of the electric handlebar cover from being too high and damaging the original handlebar.
• The wiring is recommended to connect the electric door lock wire, most models are black positive electrode, green negative electrode, specific conditions are recommended to use a multimeter measurement.