• Easy to use, one key on/off

• Stable performance and long service life

• Low power consumption, don't worry about running out of power

• 6-speed power, more accurate welding

• Self-detection function, 0.8s response time

• Charge control module, charge the phone via USB cable

• 5300mAh lithium battery, welding thousands of 0.1-0.15mm nickel sheets

• 10AWG polysilicon wire, safe to use.

Specification:

• Product: Handheld Spot Welder

• Material: aluminum alloy

• Gear: 1-6

• Battery: 3.7V/5300mAh

• Power: 6 gears

• Trigger delay time: 0.6 seconds

• Charger: 5V1A, current: not less than 1A

Instruction:

• 1. When the battery voltage drops to 3.6V, the indicator light flashes and turns off to protect the battery after discharging.

• 2. The indicator light will be indicated by the effect of breathing light during the charging process.

• 3. When charging in the off state, the indicator light is also off, and the button has no effect. You need to unplug the charger to restore the button function.

Note:

• 1. When the welding effect is poor, it means that the power is not sufficient, please charge it immediately.

• 2. Do not use it during charging.

• 3. If it does not work after working for a period of time, it may be that the power is too low to cause the main chip to not work, and the indicator light does not light up and cannot be turned on. At this time, the voltage will recover after charging for half an hour.

• 4. Please shut down when not in use for a long time.