• LED internal integration with high-quality external control single-line serial cascade constant current IC
• The controller has two independent control buttons, which can control the flickering and changing of lights according to the rhythm of music, and can change 17 stream light modes
• The ZENGGE application can control 10 fixed modes, 100 built-in modes, and can DIY multiple favorite modes
• Built-in music mode, which can change the rhythm of the lights through music, DIY your favorite fixed color mode, and view the colors of the lights through the camera
• Adjustable light brightness/speed, adjustable delay on/off lights, timed on/off lights, and on/off lights at any time
• Equipped with a 2.4G-28 key remote control, no need for alignment, wall control, can control the light body within a range of 10 meters, and can change the brightness/speed
• 7 static monochrome transformations can be switched, with one light three color static fixation, one light seven color static fixation, free light cycle switching, rainbow seven color streamer, seven color building blocks stacked, flowing color change from the middle to both sides, and flowing color change from both sides to the middle
• 100 built-in mode switching, left and right meteor switching, left and right horse running switching, capable of recording 4 scene modes and switching 4 music modes
• It can be set to turn off at a fixed time after 30 minutes to 1 hour, and the lights can be turned on/off at any time

Specification:

• Material: PVC+LED
• Voltage: 5V
• Power: 72 lights -14.4W
• Number of light strips: 72 lamps -4 lamps X32CM
• Number of LEDs: 72 LEDs
• LED type: SMD5050
• Battery: 150 mA
• Wire length: 1.3MX2+1.8MX2
• Packaging size: 72 lamp-350X60X60mm
• Illumination angle: 180 degrees wide angle illumination
• Light strip color: transparent brushed
• Remote control: 1 RF remote control with 28 buttons
• Light color: Phantom streamer, red, green, blue, white, orange, lime green, ice blue, purple
• Product certification: CE/ROHS/FCC/PSE/MSDS/SDS/UL
• Applicable socket: USB
• Scope of application: Car mounted, TV background, computer host, bedside decoration, holiday decoration, etc
• Control method: application+buttons
• Control principle: Bluetooth-compatible 4.0
• APP software type: LEDBLE
• For iPhone: The device requires iOS 8.0 or higher.
• For iPad: The device must be equipped with iPadOS 8.0 or higher.
• For iPod touch: The device needs to be equipped with iOS 8.0 or higher.
• For Mac: requires macOS 11.0 or higher and a Mac with Apple M1 or higher chips.

Installation:

• Tear off the double-sided tape on the back of the light strip, fix it in your preferred position, plug in a cigarette lighter or USB, turn on the power, and enjoy the light