• Measure the Camber and Caster angle on the wheel hub or brake disc
• Suitable for accurate checking of the castor and camber angle
• Has a simple leveling adjustment from -5 degrees to 5 degrees
• Allows adjustment to maintain correct wheel alignment and even tire wear
• Allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing
• Easy to read and convenient to operate
• Time and money saving

Instructions for use:

• Remove the four-wheel alignment sensor (fixture), remove the tire
• Carefully attaching the magnetic level to the side of the brake wheel disc.
• adjusting the level to the zero position
• Attaching the required special parts for positioning
• Using the special tool, adjust the positioning parts to the required measuring angle with the help of the magnetic level indicator
• If a small deviation is found in the remeasurement with the level, it is only necessary to make a fine adjustment under the car. (Generally, a small deviation will not cause positioning failure)

Specifications:

• Length: about 1500mm
• Bubble number: 5
• Height: 13cm
• Size: about 12.7 x 5cm/5 x 1.97" (L*D)
• Measurement range: 1.5mm
• Measurement accuracy: 99