• Adopting simple modification, no damage to the appearance, but also easy to operate, very easy to install
• PET metal heating piece, the heating speed is very fast, a few seconds quick heat, safe and fast
• Adopt three adjustable switches, you can adjust the high and low temperature according to your own needs, the design is very humanized
• Switch design can be directly installed to the rearview mirror seat, there is no need to punch holes, no need to destroy, very simple
• DC 12V input, suitable for all motorcycles, very wide range of use

Specifications:

• Product Model: CS-043A1
• Product weight: 71g
• Product Material: PET metal heating pad
• Product Size: Length: 9.5cm; Width: 8cm
• Input voltage: 12V
• Product power: 10W (one side of the power) two sides are 20W
• Handle temperature: low temperature: 30 ℃; high temperature 50 ℃-60 ℃ (only for reference)
• Switch type: three adjustable switch
• Applicable models: 12V all motorcycle models

Installation Method:

• 1. Put the heating pad on the handlebar and adjust it to the right position
• 2. Use the tape to fix (wrap) the heating element evenly to the handlebar, especially the wiring of the heating element should be tightly wound
• 3. Put on the sleeve, and adjust the position, with a hot air gun (you can also use a lighter or hair dryer), longitudinally symmetrical blowing the two creases of the outer casing until the shrinkage is uniform, and then blow the other parts of the uniform until the outer casing of the parts of the shrinkage of the uniformity of all parts of the leveling until
• 4. The switch is installed under the mirror pole of the rearview mirror
• 5. Connect the power cord, the red line, and black line do not distinguish between positive and negative poles, but must be connected to the electric door lock (insert the key place) the lower pole output line