• 【Adjustable Voltage Output】Switch between six voltage levels (5V/9V/12V/15V/20V/28V) to power a wide range of DC devices.
• 【Digital Display Screen】The built-in smart display cycles through voltage, current, and power readings for real-time charging status.
• 【High Power Support】Supports PD3.1 protocol up to 140W (28V 5A) and is backward compatible with 100W, 65W, and 40W power requirements.
• 【Durable Construction】Nylon braided mesh covers the TPE core, and the aluminum alloy housing on the DC connector enhances heat dissipation and longevity.
• 【Wide Device Compatibility】Works with laptops, routers, monitors, and other devices featuring a DC barrel connector when paired with a PD charger.

Specifications:

• Cable Length: 1.5m
• Input: Type-C
• Output: DC (cylindrical plug)
• Voltage Levels: 5V/9V/12V/15V/20V/28V
• Max Output: 140W (28V 5A)
• Protocol Support: PD3.1, PD140W (20V 7A) proprietary
• Type-C Input Size: 10.9mm x 7mm
• DC Output Plug Size: 55.8mm total length, 5.5mm diameter
• Digital Display Module Size: 37mm x 16mm x 11.6mm
• Number of Adapters: 8
• Housing Material: Aluminum Metal (DC end), PC+ABS Blended Material (control module)
• Cable Material: Nylon Thread Woven Mesh (outer), PVC-coated core (inner), Thick tinned copper wire core (conductor)

Note: Ensure the device's rated input voltage matches the selected voltage; never supply higher voltage to lower voltage devices. Use a PD charger/power bank with rated power at least 20% above the device's requirement. Confirm the DC connector size matches your device. Connect the Type-C end to the PD power source first, then switch to the appropriate voltage, and finally connect the device. The paired charger/power bank must support PD fast charging protocol.