• 【Adjustable Voltage Output】Supports six voltage levels of 5V/9V/12V/15V/20V/28V to power a wide range of DC devices.
• 【High Power Delivery】Supports PD3.1 protocol with up to 140W (28V 5A) output and is backward compatible with 100W/65W/40W power requirements.
• 【Digital Display Screen】Built-in smart digital display cycles through voltage, current, and power readings for real-time monitoring.
• 【Durable Construction】Nylon braided mesh covers the TPE core, and the connector uses an aluminum alloy housing for better heat dissipation and longevity.
• 【Wide Device Compatibility】Works with laptops, routers, monitors, LED lamps, projectors, and other devices with DC round ports.

Specifications:

• Input Interface: Type-C
• Output Interface: DC Plug, Diameter 5.5mm, Total Length 55.8mm
• Cable Length: 1.5m
• Display Module Size: 37mm x 16mm
• Input Interface Size: 10.9mm x 7mm
• Output Current: Max 7A, 140W
• Supported Protocols: PD 3.1 / PD140W (28V 5A), Compatible with PD140W (20V 7A) Private Protocol
• Voltage Levels: 5V/9V/12V/15V/20V/28V
• Housing Material: Aluminum Metal
• Cable Material: Nylon Thread Woven Mesh, TPE Core
• Core Material: Thickened Copper Wire Core
• Adapter Kit Material: PC+ABS Blended Material
• Included Accessories: 10 DC Adapters

Note: Ensure the device's rated input voltage matches the selected voltage; do not use high voltage for low voltage devices. Use a PD charger/power bank with rated power greater than the device's actual requirement, with at least 20% margin. Confirm the DC connector size matches the device interface. Connect the Type-C end to the PD power source first, then switch to the appropriate voltage, and finally connect the device. The charger/power bank must support PD fast charging protocol.