• MR-50 Radiation Detector uses 1 piece of 2-inch Geiger tube, and it is called "Scone tube" generally. In the back of the instrument, the screen is called the window. It allows the rays which can not be through the plastic box and low-energy β, γ rays to penetrate into the mica surface of Geiger tube
• MR-50 Radiation Detector is the instrument for health and safety, and measures the low-level radiation. It measures α, β, γ and x.
• Detect and measure the surface contamination
• Monitor the possible radiation of the place near the radionuclide
• Assess the environment pollution
• Detect the rare gas and other low-energy radionuclide

Specifications:

• Measuring ray types: α, β, γ and Χ rays
• Measuring range: 0.001-100mR/h, 0.01-1000µSv/h, 0-300000CPM, 0-9999XTotal
• Display: 60mmx42mm large-screen high-definition LCD, displaying six digits (including display of various modes and identifiers)
• CAL coefficient 0.01-9999 range
• Ray selection switch: combination switch selection for αβ and γΧ rays
• Sensor: Mica Geiger technology tube
• Sensitivity: 3480cpm/mR/h
• Display: µSv/h, mR/h, cps, cpm, Total, HOLD, alarm value, battery capacity
• Alarm function: sound and light alarm
• Energy range: 20KeV~3Mev
• Alarm function: set the alarm value by yourself, the factory design is 1µSv/h
• Sievert/Rem display conversion: yes
• Bar graph display: Yes
• Keep maximum value display: Yes
• Accuracy: ±15%
• Detector operating temperature: -50℃ to 70℃
• Battery: 6F22 9V battery (not included)