• BEPOCAM hardwire kit is suitable for all BEPOCAM dash cams with Type-C USB Port
• Low Voltage Protection. Automatic cut-off when voltage below 11.4V or 22.8V
• Support 24-hour parking monitor. Easy and convenient to use
• Voltage Reducer Cable (3m Cable Length) compatible with  ZD03, ZD46, ZD47, ZD55, ZD59, ZD60, ZD68, ZD72, ZD80 Models 

Specifications:

• Red=ACC
• Black=GND(-)
• Yellow=BAT(+)

Low Voltage Protection:

• 12V-11.6V(+/-0.1V)
• 24V-23.6V(=/-0.1V)
• Free Volt Input: 12V-24V

Hard-Wired Kit Installation:

• 1. The yellow wire should be connected to the fuse of the constant power supply in the car fuse box.
• 2. Connect the red wire to the ACC fuse slot and the yellow wire to the constant fuse slot.
• 3. Connect this black wire (GND) to the metal part of the vehicle.