• 4G full network connection
• Remote active wake-up, combined with independent sound cavity design, brings better two-way voice intercom
• Quick start, start recording within 400ms
• Intelligent human movement detection, intelligent alarm push
• 3000mAh battery powered, low battery reminder
• Low power system optimization
• Free 3-day cloud storage of alarm video
• CAT4 module, supports European version
• Small body, large battery capacity (3000 mAh large battery, IRCUT integrated module, supports 4G)

Specifications:

• Operating system: Linux
• Number of online users: 4 users watching online at the same time
• APP: O-KAM
• Processor: T31ZL
• Memory: 512MB
• Image sensor: GC2083, 1/3 CMOS (pixel optional, PCB compatible)
• Minimum illumination: 0.3～0.5Lux (color mode), OLux (black and white mode)
• Lens: 4G lens, IR CUT integrated, standard lens diameter: 10mm
• Viewing angle: D135-degree diagonal
• Night vision: black and white night vision, photosensitive automatic recognition of light switching, 8 940nm non-luminous patch infrared lights, illumination distance 3 to 5 meters
• Compression standard:H.265/H.264/MJPEF/JPEG
• Multi-stream: Code stream: 1080P/15fps Sub-stream: 360P/15fps
• Code rate: CBR/VBR two code rate control modes, and the output code rate range is 128~4096kbps
• Image adjustment: brightness, contrast, vertical, horizontal adjustable, OSD display
• Input: Built-in 38dB microphone
• Output: Built-in 8Ω1W speaker
• Sampling frequency/bit width: 8KHZ/16BIT
• Compression standard/code rate: G711A
• Humanoid Detection: humanoid detection, filtering invalid video content
• Area detection: only monitor areas that users care about
• Smart notification sound: different devices push different sounds, and you can know exactly which device was triggered.
• Intelligent alarm sound: set different device alarm sounds according to different scenarios
• More AI functions are in internal testing: pets, vehicles, packages, etc.
• Wireless connection: scan the device QR code to add/the device scans the APP QR code
• Domestic Cat1: FDD:B1/B3/B5/B8
• TDD: B34/B38/B39/B40/B41
• Overseas Cat4: European version/Japanese version/American version/Australian version
• Toggle button 1: turn on and off
• Toggle button 2: mode switching (4G networking mode and DV local recording mode switching)
• Reset button: long press to restore factory settings
• External TF card: supports T-Flash card (up to 256GB) (Not included)
• Cloud Storage: 3 days of free cloud storage
• Alarm detection: supports human body motion detection, PIR infrared human body detection
• Rated voltage: DC5V±5%
• Power supply: Built-in 3000mAh battery
• Power consumption: sleep standby current: 5mA, working current: 400-600mA
• Working environment: working temperature: -10~55℃, working humidity <90%
• Size: 56x43x44mm