• It is allowed to add a second power supply unit to the PC. The two power supplies will be equipped with a single motherboard and use the second power supply to power multi-channel graphics cards. With this simple adapter, you can add the power of 2 PSUs into one. A must be any Litecoin

• All copper cores are used to ensure stable current power supply

• Turn on and off the two power supplies at the same time, thereby increasing the power of the power supply.

• Imported black environmental protection 24PIN (20+4) male/24PIN female*2, old motherboards can also be used

Specification:

• Product length: 30cm

• Insulation material: PVC insulation

• Conductor material: tinned copper

• Wire outer diameter: OD2.1mm

• Rated temperature: 80℃

• Product weight: 85 g

• Product interface: 5557 24pin (20+4) at one end, 5559 24Pin at the other end

How to use: 

• Plug the 24PIN of the main power supply into the female plug and plug the other end into the motherboard, and plug the secondary power supply into the other 24PIN female plug to switch the power at the same time

Warm Tips:

• Be sure to recognize the direction when plugging in, do not plug it in reverse or off-position to prevent burning of the device

• When plugging in, hold the socket of the device before plugging in to avoid inserting the socket pins with excessive force